We're open until 7:00pm MST

Fjallraven - Travel Wallet

$65.00
Spacious travel wallet in G-1000 HeavyDuty that keeps passports and unfolded boarding cards in order. Pocket for money and credit cards.
Out of stock
Ship it today? Order by 3:00p, Mon-Fri
Free sameday pickup Order by 6:30p, Mon-Sat

PRODUCT DESCRIPTION

Spacious travel wallet in durable G-1000 HeavyDuty with G-1000 Original on the inside. Keeps pens, passports and unfolded boarding passes in order when you are traveling. An open outside pocket lets you have travel documents close at hand when you are at the airport. On the inside there is an open pocket for banknotes, business cards, credit cards etc. There is also a zippered inside pocket for coins. Pen holder and other details in leather.

Product Features

  • Zippered wallet in G-1000 HeavyDuty Eco.

  • Lining in G-1000 Eco.

  • Sized for passport and boarding pass.

  • Can hold credit cards, business cards and bank notes.

  • Zippered coin compartment.

G-1000

Adaptable for a lifetime in nature

 Hardwearing  
 Customisable weather protection with Greenland Wax
 Ventilating
 

CARE & REPAIR

How to wax G-1000

Made from a mixture of beeswax and paraffin, Greenland Wax is a simple, nature-inspired solution to the challenges faced in the outdoors. Most of our G-1000 materials come pre-waxed, but it’s still a good idea to know how to re-apply and remove the wax to adapt your jacket to the conditions.

1. APPLY WAX

Take the block of Greenland Wax and rub it with long, smooth strokes against the fabric leaving behind a thin, even layer. You’ll want to apply some pressure when you do this, but not too much that your movements becomes jerky.

2. MELT

Using an iron (or a hairdryer) on low to moderate heat, melt the wax into the fabric. Again use long, even strokes. Greenland Wax melts at between 55°C and 60°C (131-140°F), so try to keep the iron temperature around this point – you don’t want the wax to get too runny. Don’t forget to wipe off the iron after use before ironing other garments.

3. REPEAT

This step isn’t always necessary, but if you want to make the fabric even more water resistant, repeat the process several times rather than applying a single, thick layer of wax. This is a good idea for exposed sections of the garment such as the hood and shoulders or the knees and rear.

WAXING ON THE GO

You can also use the flame of a camp stove to melt Greenland Wax. If you choose to wax on the go, hold the garment roughly 20-30cm above a steady flame. Don’t start too close! Begin further away and slowly move the garment closer to the flame until you see the wax starting to melt. Be careful not to burn the fabric or yourself. Stretch out the fabric over the flame and move it back and forth until the wax has melted.

 

What happens when waxing products with down or synthetic padding or Hydratic lining? 
So you don’t affect the filling or sensitive synthetic lining used to stop down escaping through fabric, we recommend using a hairdryer to warm the wax. For down, you can also use a tumble dryer on a low heat.

PRODUCT INFORMATION

  • Outer material: G-1000® Original: 65% polyester, 35% cotton, G-1000® HeavyDuty: 65% polyester, 35% cotton
  • Gender: Unisex
  • Concept: Outdoor
  • Height: 22 cm
  • Width: 12 cm
  • Depth: 2 cm
  • Weight: 140 g
  • Non Textile Parts of Animal Origin: Yes
  • Activity: Everyday Outdoor
  • Laptop pocket: No
Weight: 0.22 LBS
Dimensions: 8.66 IN x 4.72 IN x 0.79 IN
Volume:
Fabric Main: G-1000
Fabric Accent: Natural Leather
Fabric Bottom: N/A
0 stars based on 0 reviews

Please accept cookies to help us improve this website. Is this OK? Yes No More on cookies »