Convenient everyday bag, a larger version of the popular Totepack No. 1 with an extra durable base in natural-toned leather. Can be carried by hand, on the shoulder or as a backpack and is perfect for your wallet, extra sweater, tablet and everything else you need to have close at hand throughout the day. Made from robust G-1000 HeavyDuty that is hardwearing and just gets better looking the more the bag is used. The main compartment has a zippered opening and a little inner pocket for keys, wallet and other items you want to keep safe. There is also an outside zippered pocket, and the bag comes with a keyring on a textile strap. Short leather handles and long textile shoulder straps, the latter which can be adjusted so the bag can be carried as a backpack.
A larger version of the popular Totepack No.1.
Made from robust G-1000 HeavyDuty Eco.
Can be carried on the shoulder or as a backpack.
Extra durable base in natural-toned leather.
Adaptable for a lifetime in nature
Customisable weather protection with Greenland Wax
How to wax G-1000
Made from a mixture of beeswax and paraffin, Greenland Wax is a simple, nature-inspired solution to the challenges faced in the outdoors. Most of our G-1000 materials come pre-waxed, but it’s still a good idea to know how to re-apply and remove the wax to adapt your jacket to the conditions.
Take the block of Greenland Wax and rub it with long, smooth strokes against the fabric leaving behind a thin, even layer. You’ll want to apply some pressure when you do this, but not too much that your movements becomes jerky.
Using an iron (or a hairdryer) on low to moderate heat, melt the wax into the fabric. Again use long, even strokes. Greenland Wax melts at between 55°C and 60°C (131-140°F), so try to keep the iron temperature around this point – you don’t want the wax to get too runny. Don’t forget to wipe off the iron after use before ironing other garments.
This step isn’t always necessary, but if you want to make the fabric even more water resistant, repeat the process several times rather than applying a single, thick layer of wax. This is a good idea for exposed sections of the garment such as the hood and shoulders or the knees and rear.
You can also use the flame of a camp stove to melt Greenland Wax. If you choose to wax on the go, hold the garment roughly 20-30cm above a steady flame. Don’t start too close! Begin further away and slowly move the garment closer to the flame until you see the wax starting to melt. Be careful not to burn the fabric or yourself. Stretch out the fabric over the flame and move it back and forth until the wax has melted.
What happens when waxing products with down or synthetic padding or Hydratic lining?
So you don’t affect the filling or sensitive synthetic lining used to stop down escaping through fabric, we recommend using a hairdryer to warm the wax. For down, you can also use a tumble dryer on a low heat.
Outer material: G-1000® HeavyDuty: 65% polyester, 35% cotton
Height: 42 cm
Width: 33 cm
Depth: 12 cm
Weight: 750 g
Volume: 16 L
Non Textile Parts of Animal Origin: Yes
Laptop pocket: No
|Dimensions:||16.5 IN x 13.0 IN x 4.7 IN|
|Volume:||0 IN3 / 0 L|
|Fabric Accent:||Natural Leather|